[Ordering Help]
Flex Shaft Hand Pieces
How do I place an order?
Slim collet handpiece for fine detail work. Pre lubricated ball bearings require no maintenance. Chuck guard slides back when changing burs. Comes with 3/32" and 1/8" collets and chuck wrenches for changing collets and accessories.
Same as the No. 8, with the addition of a Duplex Spring. The spring provides extra flexibility to the handpiece.
A slender, comfortable design with tapered grip and pre-lubricated ball bearings that do not require lubrication. Comes with 3/32" and 1/8" collets, pin and chuck wrench for changing collets and accessories.
Foredom's most popular handpiece features a #0 geared 3-jaw Jacobs® Chuck. It accepts any size accessory shank or drill bit up to 5/32". Pre lubricated ball bearings require no maintenance. Comes with HPCK-0 chuck key.
Collet type handpiece that accommodates accessories with up to 1/4" diameter shanks. Pre lubricated ball bearings require no maintenance. Comes with 3/32", 1/8" and 1/4" collets, pin and wrench for changing collets and accessories.
The No. 10 is a Quick Change Handpiece featuring a slim grip and pre-lubricated ball bearings that do not require any lubrication. For use with only 3/32" (2.35mm) burs. A rotating lever action is all that is required to change accessories.
Handpiece with hammering rather than rotary action for use at low speed (0-5,000 rpm) by jewelers for stone setting and decorative work. Comes with an anvil point (HP10177).
Same as the No. 15, with the addition of a Duplex Spring. The spring provides extra flexibility to the handpiece.
Unique handpiece with speed increaser that produces 2.5 times the speed of the motor. Comes with 1/8" collet installed unless otherwise specified. We Recommend this handpiece when high speed and accuracy is needed, such when using diamond fly wheels for bright cutting metals.
